Currency: 
Shopping cart: (empty)

Total amount (with discount)empty

Go to cart

  • Unit10, 4 Dunlop Court,Bayswater, VIC3153, Australia
  • +61-3-88029296

Accessories

On page 6 15 30 45 all
  • Option- Rigol  DSA800-VSWR
    $851
    VSWR Measurement Kit (DSA815 Only),  (  VSWR Bridge not included)
  • M3TB32 Terminal Box for MC3132
    $145
    M3TB32 Terminal block accessory for M300 DAQ system modules with model numbers ending in 32.
  • Rigol DG5-FH
    $2,899
    Frequency hopping software license option for DG5000 series AWG
  • Option- Rigol  DSA- Utility Kit
    $1,300
    DSA Accessories Package including?cables, adaptors, and antennas.
  • M3TB34 Terminal Box for MC3534
    $145
    M3TB34 Terminal block accessory for M300 DAQ system modules with model numbers ending in 34.
  • Rigol SD-DS2 Serial Decoder for DS2000
    $376
    High quality 2 channel DSO with 70MHz bandwidth and 2GSa/s. Up to 200 MHz bandwidth 2 GSa/s sample rate 14 million memory points, standard 65,000 Waveforms per second Original Ultravision technology Hardware allows for real-time, continuous waveform recording and waveform analysis
  • Rigol UltraStation Advanced  for DG5000, DG4000
    $146
    Arbitrary Waveform Generator Software for the DG4000 and DG5000 instruments. UltraStation Advanced,
  • M3TB48 Terminal Box for MC3648
    $145
    M3TB48 Terminal block accessory for M300 DAQ system modules with model numbers ending in 48.
  • Rigol AT-DS2 Advanced Trigger for DS2000
    $376
    High quality 2 channel DSO with 70MHz bandwidth and 2GSa/s. Up to 200 MHz bandwidth 2 GSa/s sample rate 14 million memory points, standard 65,000 Waveforms per second Original Ultravision technology Hardware allows for real-time, continuous waveform recording and waveform analysis
  • Rigol DG5-RMK
    $294
    Rack Mounting Kit for a DG5000 Series Generator. May be different than image. Rack kits are different for each instrument.
  • M3TB64 Terminal Box for MC3164
    $145
    M3TB64 Terminal block accessory for M300 DAQ system modules with model numbers ending in 64.
  • Rigol MEM-DS2 Memory ( 56 Mpts  )Option for DS2000
    $567
    High quality 2 channel DSO with 70MHz bandwidth and 2GSa/s. Up to 200 MHz bandwidth 2 GSa/s sample rate 14 million memory points, standard 65,000 Waveforms per second Original Ultravision technology Hardware allows for real-time, continuous waveform recording and waveform analysis
  • Rigol PA1011  10W Power  Amplifier
    $709
    10W POWER AMPLIFIER FOR GENERATORS
  • MC3065 DMM Module
    $931
    ·DMM module ·Used to measure the signal ·6½ digits ·Support the following functions: DCV, ACV, DCI, ACI, 2WR, 4WR, FREQ, PERIOD, TEMP and any sensor ·After connecting the DMM module, make sure that the signal under test connected to the analog bus is no greater than 300 Vdc or 300 Vrms
  • Option- Rigol - VB1040 VSWR Bridge
    $1,537
    800 MHz to 4 GHz VSWR Bridge for DSA1030-TG and DSA1030A-TG
  • MC3120 20CH Multiplexer
    $648
    20-channel multiplexer ·All 20 channels switch both HI and LO inputs ·Support 4-wire measurement ·The signal to be tested is connected through the M3TB20 terminal block ·Can be connected with MC3065
  • Rigol RP3500A Oscilloscope Probe 500MHz
    $366
    Rigol RP-3500 10:1 Passive probe Frequency Bandwidth 500MHz  
  • Rigol  MEM-DG1000Z
    $329
    16M ARB MEMORY DEPTH MODULE
  • MC3132 32CH Multiplexer
    $795
    ·32-channel multiplexer ·All 32 channels switch both HI and LO inputs ·Support 4-wire measurement ·The signal to be tested is connected through the M3TB32 terminal block ·Can be connected with MC3065
  • Option-  VB1080  VSWR Bridge
    $1,182
    VSWR Bridge and DSA800-VSWR software for Rigol Spectrum Analyzers. The VB1080's range is from 2-8 GHz
  • Option- OCXO - B08
    $897
    OCXO-B08 Timebase | High stability timebase option for the DSG800 Series RF signal sources
  • MC3164  64CH Multiplexer
    $907
    ·64-channel single-ended multiplexer ·All 64 channels can switch HI input only ·Doesn't support 4-wire measurement ·The signal to be tested is connected through the M3TB64 terminal block ·Can be connected with MC3065
  • Option- Rigol DSA - UltraSpectrum Software
    $543
    Software for the DSA800, DSA1000 and DSA1000A series spectrum analyzers to be used within the UltraSigma package.
  • MC3324  24CH Multiplexer
    $953
    ·Mixed multiplexer with 20 voltage channels and 4 current channels ·All 20 voltage channels switch both HI and LO inputs ·20 voltage channels support 4-wire measurement ·4 current channels are used to measure DC current or AC current ·The signal to be tested is connected through the M3TB24 terminal block ·Can be connected with MC3065
  • Option- Rigol - DSA- AMK
    $933
    Advance Measurement Kit for DSA1000 Series
  • MC3416  16CH Multiplexer
    $685
    ·16-channel actuator ·Can connect signal to the device under test or enable external device ·Any of the 16 channels can switch to Normally-Open (NO) and Normally-Closed (NC) states ·The signal is connected through the M3TB16 terminal block
  • MC3534   Multifunction Module
    $985
    ·Multifunction module ·DIO: four 8-bit digital input/output ports ·TOT: four totalizer input terminals ·DAC: four analog output terminals ·The signal is connected through the M3TB34 terminal block
  • Rigol PVP2350  Oscilloscope Probe 300MHz
    $75
    Rigol RP-3300 10:1 Passive probe Frequency Bandwidth 350MHz  
  • Option- Rigol  RMSA   RACK MOUNT KIT
    $542
    Rack Mounting Kit for a DSA1000 Series or DSA1000A Series Spectrum Analyzer. May be different than image. Rack kits are different for each instrument.

© Racomtech Pty Ltd (ACN:134853 473) / EYou Trust Australia ( ABN 51 687 385 403)


  • +61-3-88029296
  • Sun 09:00—16:59
Dear friends!

Unfortunately, your browser does not support modern technology used on our website.

Please refresh your browser by downloading it on the links below or contact your system administrator serving your computer.

Internet Explorer

от Microsoft

Chrome

от Google

Safari

от Apple

Opera

от Opera Software

Firefox

от Mozilla