Currency: 
Shopping cart: (empty)

Total amount (with discount)empty

Go to cart
  • +61-3-88029296
  • E-mail: sales@eyou.com.au
  • mount waverley, vic 3149
  • +61-3-88029296

For Data Acquisition

On page 6 15 30 45 all
  • M3A2B ANALOG BUS TO BANNA PORT
    $36(ex.GST)

    M3A2B Analog bus to banana jack cable for M300 system mainframe. For direct external connection of DM3065 DMM module to external signal.

  • M3GPIB CONNECTOR - GPIB Reverse connection adaptor for M300 mainframe.​
    $117(ex.GST)

    M3GPIBCONNECTOR GPIB Reverse connection adaptor for M300 mainframe.​

  • M3TB16 Terminal Box for MC3416
    $121(ex.GST)

    M3TB16 Terminal block accessory for M300 DAQ system modules with model numbers ending in 16.

  • M3TB20 Terminal Box for MC3120
    $121(ex.GST)

    M3TB20 Terminal block accessory for M300 DAQ system modules with model numbers ending in 20.

  • M3TB24 Terminal Box for MC3324
    $121(ex.GST)

    M3TB24 Terminal block accessory for M300 DAQ system modules with model numbers ending in 24.

  • M3TB32 Terminal Box for MC3132
    $121(ex.GST)

    M3TB32 Terminal block accessory for M300 DAQ system modules with model numbers ending in 32.

  • M3TB34 Terminal Box for MC3534
    $121(ex.GST)

    M3TB34 Terminal block accessory for M300 DAQ system modules with model numbers ending in 34.

  • M3TB48 Terminal Box for MC3648
    $121(ex.GST)

    M3TB48 Terminal block accessory for M300 DAQ system modules with model numbers ending in 48.

  • M3TB64 Terminal Box for MC3164
    $121(ex.GST)

    M3TB64 Terminal block accessory for M300 DAQ system modules with model numbers ending in 64.

  • MC3065 DMM Module
    $864(ex.GST)

    ·DMM module ·Used to measure the signal ·6½ digits ·Support the following functions: DCV, ACV, DCI, ACI, 2WR, 4WR, FREQ, PERIOD, TEMP and any sensor ·After connecting the DMM module, make sure that the signal under test connected to the analog bus is no greater than 300 Vdc or 300 Vrms

  • MC3120 20CH Multiplexer
    $600(ex.GST)

    20-channel multiplexer ·All 20 channels switch both HI and LO inputs ·Support 4-wire measurement ·The signal to be tested is connected through the M3TB20 terminal block ·Can be connected with MC3065

  • MC3132 32CH Multiplexer
    $739(ex.GST)

    ·32-channel multiplexer ·All 32 channels switch both HI and LO inputs ·Support 4-wire measurement ·The signal to be tested is connected through the M3TB32 terminal block ·Can be connected with MC3065

  • MC3164  64CH Multiplexer
    $751(ex.GST)

    ·64-channel single-ended multiplexer ·All 64 channels can switch HI input only ·Doesn't support 4-wire measurement ·The signal to be tested is connected through the M3TB64 terminal block ·Can be connected with MC3065

  • MC3324  24CH Multiplexer
    $887(ex.GST)

    ·Mixed multiplexer with 20 voltage channels and 4 current channels ·All 20 voltage channels switch both HI and LO inputs ·20 voltage channels support 4-wire measurement ·4 current channels are used to measure DC current or AC current ·The signal to be tested is connected through the M3TB24 terminal block ·Can be connected with MC3065

  • MC3416  16CH Multiplexer
    $641(ex.GST)

    ·16-channel actuator ·Can connect signal to the device under test or enable external device ·Any of the 16 channels can switch to Normally-Open (NO) and Normally-Closed (NC) states ·The signal is connected through the M3TB16 terminal block

  • MC3534   Multifunction Module
    $985(ex.GST)

    ·Multifunction module ·DIO: four 8-bit digital input/output ports ·TOT: four totalizer input terminals ·DAC: four analog output terminals ·The signal is connected through the M3TB34 terminal block

  • MC3648   4 x 8 Matrix Switch
    $804(ex.GST)

    ·4×8 two-wire matrix switch ·Used to connect multiple devices to multiple points on the device under test ·32 two-wire cross points which can connect any combination of inputs and outputs at the same time ·The signal is connected through the M3TB48 terminal block

  • RM - 1- M300   1 Unit Rack Mount Kit
    $435(ex.GST)

    Rack Mount for 1 M300

  • RM - 2- M300   2 Units Rack Mount Kit
    $488(ex.GST)

    Rack Mount for 2 M300

  • MC-UAP  Full Function PC Software
    $1,492(ex.GST)

    MC-UAP Full Function PC Software

© Racomtech Pty Ltd (ACN:134853 473) / EYou Trust Australia ( ABN 51 687 385 403)

  • +61-3-88029296
  • E-mail: sales@eyou.com.au
  • mount waverley, vic 3149
  • +61-3-88029296

Dear friends!

Unfortunately, your browser does not support modern technology used on our website.

Please refresh your browser by downloading it on the links below or contact your system administrator serving your computer.

Internet Explorer

от Microsoft

Chrome

от Google

Safari

от Apple

Opera

от Opera Software

Firefox

от Mozilla