RACOMTECH is a professional RF & Microwave technology company, our RF & Microwave...
Read moreCatalog
- –Test Instruments
- –Coaxial Cable & Assemblies
- –RF Components
- –RF Connectors
- –Coax Adapters
- –2.92mm
- –3.5mm
- –4.3/10 to N, 716
- –BNC - UHF
- –F to BNC
- –In series BNC
- –In series DIN 716
- –In series N type
- –In series RP-SMA
- –In series SMA
- –In series TNC
- –In series UHF
- –N Type - BNC
- –N Type - DIN716
- –N type - F adapter
- –N type - MCX
- –N type - RP-SMA
- –N Type - SMA
- –N type - SMB
- –N Type - TNC
- –N Type - UHF
- –RP-SMA / RP-TNC
- –SMA - F adapter
- –SMA - RP-SMA
- –SMA / BNC Adapter
- –SMA / TNC adapters
- –SMA / UHF adapters
- –TNC / RP-SMA / BNC
- –K 2.92mm
- –3.5mm
- –N type
- –QMA
- –SMA
- –TNC
- –7/16 DIN
- –4310
- –BNC
- –FME
- – F
- –MCX
- –SMB
- –UHF
- –Coax Adapters
- –Tools & Soldering Station
- –Custom Design
- –Clearance Centre
Information
LatestCable Catalogue
Ournews
-
01/28/2026
-
03/31/2025
The outer conductor size of these connectors prevents the mating of incompatible connectors. Connectors in each...
Read more -
04/01/2018
The VSWR ( The voltage standing wave ratio ) is a measure of impedance match of load to the transmission...
Read more -
03/21/2018
Simplified EMI PreCompliance & Debug RSA5000 SERIES SPECTRUM ANALYZERS High Performance...
Read more
Rigol ECAL114-NF2 - Electronic Calibration Module (100kHz to 14GHz, Type-N (f), 50 Ω, 2 ports)
Description
Reviews (0)
Datasheet
OVERVIEW
Features
Overview
SPECIAL OFFER: Unlock 50% savings on ECAL Electronic Calibration Kits, one for each unit purchased, optimising your RF measurements at half the cost!
Rigol ECAL114-NF2 - Electronic Calibration Module (100kHz to 14GHz, Type-N (f), 50 Ω, 2 ports)
RIGOL’s electronic calibration (ECal) modules are available in several models, covering the frequency range from 100 kHz to 26.5 GHz. The RF connector types are 3.5 mm and Type-N. ECal module uses the USB interface for communication and power supply. ECal module is applicable to calibrate and correct errors for vector network analyzers from RIGOL.
ECal Modules Overview:
- Frequency range: 100 kHz to 14 GHz
- Maximum power level: +10 dBm
- Maximum protective DC voltage: ±10 VDC
- RF connector types: N female connector, Type-N 50 Ω female connector
- Number of ports supported: 2
- Power supply: USB 2.0
ECal module offers easier operation, higher efficiency, and greater reliability than a mechanical calibration module, while requiring fewer connections to complete a calibration. For example, a four-port ECal module calibration requires only six connections, whereas a conventional mechanical module calibration requires eighteen connections. ECal module greatly reduces human-induced errors and cable wear from repeated mate-and-demate cycles, while maintaining equivalent calibration accuracy. ECal module supports multiple connector types and covers most applications of mechanical kits, especially in high-frequency or multi-port testing. ECal module avoids instability introduced by repeated connections and significantly improves calibration efficiency and test reliability.
ECal Module ManualElectronic Calibration Module Selection Chart
| Model | Frequency Range | No. of Ports | Description |
|---|---|---|---|
| ECAL109-NF2 | 100 kHz to 9 GHz | 2 | Type N (F) 50Ω |
| ECAL114-NF2 | 100 kHz to 14 GHz | 2 | Type N (F) 50Ω |
| ECAL126-35F2 | 100 kHz to 26.5 GHz | 2 | 3.5 mm (F) |
Features
| OPTION & ACCESSORY | DNA6000 |
| FREQUENCY | 14 GHz |
| FUNCTION | VNA Calibration kits |
| BRAND | Rigol |
| shipping height | 12 cm |
| shipping width | 16 cm |
| shipping length | 20 cm |
| shipping weight | 1 kg |
| IMPEDANCE | 50 Ohm |
Reviews
Datasheet
DNA6000 Series User Guide OVERVIEW
DNA6000 series vector network analyzer- Overview
Broad Frequency Range for Diverse Applications
Delivering a frequency range from 5 kHz to 26.5 GHz with 4 or 2 test ports, this analyzer precisely covers testing requirements ranging from basic passive components to material dielectric constant analysis and high-speed interconnects.
Superior Performance & Stability
Achieve precise characterization with a wide dynamic range >120 dB and low trace noise, ensuring stability even when testing high-suppression devices.
Advanced Analysis Tools Built-In
Accelerate your workflow with essential integrated tools including Pass/Fail limits, SWR, Smith Charts, and TDRu2014perfect for both the lab and the production floor.
True Device Performance via De-embedding
See the real performance of your DUT. Our Fixture Removal and De-embedding features strip away errors caused by cables and adapters, delivering the true S-parameters you need.
Intuitive Calibration
No more guesswork. Our step-by-step Calibration Wizard guides users of all skill levels to achieve accurate, calibrated setups in seconds.
Mechanical or Electronic Calibration
Choose the precision of our durable mechanical kits or the speed and consistency of our Electronic Calibration (E-Cal) modules to maximize testing efficiency.
Complete Accessory Support
Get up and running faster with our comprehensive ecosystem of accessoriesu2014your one-stop shop for reliable testing.
Drop-In Compatibility
Upgrade your test system effortlessly. With standard SCPI support and command set compatibility, you can integrate this unit into existing automated systems without rewriting code.
Broad Frequency Range for Diverse Applications
Delivering a frequency range from 5 kHz to 26.5 GHz with 4 or 2 test ports, this analyzer precisely covers testing requirements ranging from basic passive components to material dielectric constant analysis and high-speed interconnects.
Superior Performance & Stability
Achieve precise characterization with a wide dynamic range >120 dB and low trace noise, ensuring stability even when testing high-suppression devices.
Advanced Analysis Tools Built-In
Accelerate your workflow with essential integrated tools including Pass/Fail limits, SWR, Smith Charts, and TDRu2014perfect for both the lab and the production floor.
True Device Performance via De-embedding
See the real performance of your DUT. Our Fixture Removal and De-embedding features strip away errors caused by cables and adapters, delivering the true S-parameters you need.
Intuitive Calibration
No more guesswork. Our step-by-step Calibration Wizard guides users of all skill levels to achieve accurate, calibrated setups in seconds.
Mechanical or Electronic Calibration
Choose the precision of our durable mechanical kits or the speed and consistency of our Electronic Calibration (E-Cal) modules to maximize testing efficiency.
Complete Accessory Support
Get up and running faster with our comprehensive ecosystem of accessoriesu2014your one-stop shop for reliable testing.
Drop-In Compatibility
Upgrade your test system effortlessly. With standard SCPI support and command set compatibility, you can integrate this unit into existing automated systems without rewriting code.
