RACOMTECH is a professional RF & Microwave technology company, our RF &...
Read moreCatalog
- –Test Instruments
- –Coaxial Cable & Assemblies
- –RF Components
- –RF Connectors
- –Coax Adapters
- –2.92mm
- –3.5mm
- –4.3/10 to N, 716
- –BNC - UHF
- –F to BNC
- –In series BNC
- –In series DIN 716
- –In series N type
- –In series RP-SMA
- –In series SMA
- –In series TNC
- –In series UHF
- –N Type - BNC
- –N Type - DIN716
- –N type - F adapter
- –N type - MCX
- –N type - RP-SMA
- –N Type - SMA
- –N type - SMB
- –N Type - TNC
- –N Type - UHF
- –RP-SMA / RP-TNC
- –SMA - F adapter
- –SMA - RP-SMA
- –SMA / BNC Adapter
- –SMA / TNC adapters
- –SMA / UHF adapters
- –TNC / RP-SMA / BNC
- –K 2.92mm
- –3.5mm
- –N type
- –QMA
- –SMA
- –TNC
- –7/16 DIN
- –4310
- –BNC
- –FME
- – F
- –MCX
- –SMB
- –UHF
- –Coax Adapters
- –Tools & Soldering Station
- –Custom Design
- –Clearance Centre
Information
LatestCable Catalogue
Ournews
-
03/31/2025
The outer conductor size of these connectors prevents the mating of incompatible connectors....
Read more -
04/01/2018
The VSWR ( The voltage standing wave ratio ) is a measure of impedance match of load to the transmission...
Read more -
03/21/2018
Simplified EMI PreCompliance & Debug RSA5000 SERIES SPECTRUM ANALYZERS High Performance...
Read more
VNA Accessories
$199RF coaxial precision test cable with N type male stainless steel, frequency up to 18GHz
$213RF coaxial precision test cable assembled with SMA and N type male stainless steel connectors, frequency up to 18GHz
$189RF coaxial precision test cable assembled with SMA and N type male stainless steel connectors, frequency up to 18GHz
$152RF coaxial precision test cable with N type male stainless steel, frequency up to 18GHz
$155The 3.5mm–FF-26.5-110 adapter is the option adapter for 3.5mm port calibration kit. The adapter frequency range is covered from DC to 26.5GHz. The EUC900-3.5mm calibration kit can replace Agilent 85033E calibration kits, the 85033E calibration coefficient data can be used directly to achieve the high calibrations specification below
$155The 3.5mm–MF-26.5-110 adapter is the option adapter for 3.5mm port calibration kit. The adapter frequency range is covered from DC to 26.5GHz. The EUC900-3.5mm calibration kit can replace Agilent 85033E calibration kits, the 85033E calibration coefficient data can be used directly to achieve the high calibrations specification below
$155The 3.5mm–MM-26.5-110 adapter is the option adapter for 3.5mm port calibration kit. The adapter frequency range is covered from DC to 26.5GHz. The EUC900-3.5mm calibration kit can replace Agilent 85033E calibration kits, the 85033E calibration coefficient data can be used directly to achieve the high calibrations specification below
$225Max VSWR 1.15:1 @ 18GHz
$225Max VSWR 1.15:1 @ 26.5GHz
$245precision coaxial test cable with 2.9mm male stainless steel, frequency up to 40GHz- $455Economy VNA Calibration Kits - 3GHz N (female), Equivalent to Agilent 85032BE.
- $455Economy VNA Calibration Kits - 3GHz N (Male), VAN OSL Calibration kits , Equivalent to Agilent 85032BE.
- $985Economy VNA Calibration Kits - 6GHz N (Male), VAN SOL(T) Calibration kit , Equivalent to Agilent 85032B/E.
- $985Economy VNA Calibration Kits - 6GHz N (Male), VAN SOL(T) Calibration kit , Equivalent to Agilent 85032B/E.
- $785Economy VNA Calibration Kits DC-9 GHz 3.5mm (Male), VAN SOL(T) Calibration kit , Equivalent to Agilent 85032B/E.
- $785Economy VNA Calibration Kits DC-9 GHz 3.5mm (Male), VAN SOL(T) Calibration kit , Equivalent to Agilent 85032B/E.
$48518GHz Phase stable test cable assemby
$3,850Pecision VNA Calibration Kits - 6GHz N (Male), VAN SOL(T) Calibration kit , Equivalent to Agilent 85032B/E.
$6,773$3,206Electronic Calibration Module, 100 kHz ~ 9 GHz, Type-N (f), 50 ohm, 2 ports. ECal module is applicable to calibrate, correct errors for vector network analyzers from Rigol Frequency range: 100 kHz to 9GHz Maximum power level: +10 dBm Maximum protective DC voltage: ±10 VDC RF connector type: Type-N 50 O female connector Number of ports supported: 2 Power supply: USB 2.0
$7,481$3,562Electronic Calibration Module, 100 kHz ~ 14 GHz, Type-N (f), 50 ohm, 2 ports. ECal module is applicable to calibrate, correct errors for vector network analyzers from Rigol Frequency range: 100 kHz to 14GHz Maximum power level: +10 dBm Maximum protective DC voltage: ±10 VDC RF connector type: Type-N 50 O female connector Number of ports supported: 2 Power supply: USB 2.0
$10,100$4,809Electronic Calibration Module, 100 kHz ~ 26.5 GHz, 3.5 mm (f), 2 ports. ECal module is applicable to calibrate, correct errors for vector network analyzers from Rigol Frequency range: 100 kHz to 26.5GHz Maximum power level: +10 dBm Maximum protective DC voltage: ±10 VDC RF connector type: 3.5mm female connector Number of ports supported: 2 Power supply: USB 2.0
$711Mechanical Calibration Kit, DC ~ 4.5 GHz, Type-N (f), 50 Ω for DNA5000/6000
$711Mechanical Calibration Kit, DC ~ 4.5 GHz, Type-N (m), 50 Ω for DNA5000/6000
$890Mechanical Calibration Kit, DC ~ 4.5 GHz, 3.5 mm (m) for DNA5000/6000
$890Mechanical Calibration Kit, DC ~ 4.5 GHz, 3.5 mm (m) for DNA5000/6000
$2,671Mechanical Calibration Kit, DC ~ 9 GHz, Type-N (f), 50 Ω for DNA5000/6000
$4,987RIGOL MCAL109-NK1 Mechanical Calibration Kit, 9GHz, Type-N (M/F), 50 Ohm, For DNA5000/6000 Series
$2,671Mechanical Calibration Kit, DC ~ 9 GHz, Type-N (m), 50 Ω for DNA5000/6000
$3,205Mechanical Calibration Kit, DC ~ 9 GHz, 3.5 mm (f) for DNA5000/6000
$5,343RIGOL MCAL109-SK1 Mechanical Calibration Kit, 9GHz, SMA (M/F), 50 Ohm, For DNA5000/6000 Series
