Rigol DNA5000

Rigol DNA5000 VNA

The DNA5000 series is a compact and cost-effective 2-port VNA platform designed for high-performance RF measurements in a portable form factor. Typical applications include RF component characterization, cable and antenna testing, university labs, and general RF debugging.

• Frequency range: 5 kHz to 26.5 GHz (model dependent)
• 2-port
• High dynamic range: up to 127 dB (typ.)
• Frequency resolution: 1 Hz
• IF bandwidth: 1 Hz to 10 MHz
• Maximum output power: up to +10 dBm
• Low trace noise (typ.): 0.005 dB
• Comprehensive calibration support: SOLT, OSL, response, enhanced response, and ECal
• 10.1″ capacitive touch display, compact and lightweight design
• LAN, USB, HDMI interfaces with SCPI and Web Control support

Another highlight of the DNA5000 models is the optional Distance-to-Fault mode: It precisely locates faults and impedance jumps along RF cables and line structures, making fault sources visible at a glance. In conjunction with Smith chart and polar displays, impedance matching is transformed from an abstract theoretical topic into an intuitively manageable task—ideal for fine-tuning antennas, filters, and high-speed interconnects. This makes the DNA5K the central solution for comprehensive analysis of transmission and reflection characteristics, signal integrity, and reliable troubleshooting in modern RF designs.

• 

  3.5MM male to 3.5MM female Armoured Jacket TEST Cable 26.5GHz

  $530

  26.5GHz Phase stable test cable assemby
• 

  Rigol DNA-DTF10 Distance-to-Fault

  $1,602
• 

  Rigol DNA-TDA10 Time Domain Analysis

  $2,671
• 

  Rigol DNA5042 2-Port Vector Network Analyzer (5 kHz - 4.5 GHz)

  $10,510

  2-port vector network analyzer from 5 kHz to 4.5 GHz with a 25.65 cm LCD touch display with a resolution of 1280x800 pixels
• 

  Rigol DNA5082 2-Port Vector Network Analyzer (5 kHz - 8.5 GHz)

  $17,814

  2-port vector network analyzer from 5 kHz to 8.5 GHz with a 25.65 cm LCD touch display with a resolution of 1280x800 pixels
• 

  Rigol DNA5142 2-Port Vector Network Analyzer (5 kHz - 8.5 GHz)

  $23,693

  2-port vector network analyzer from 5 kHz to 8.5 GHz with a 25.65 cm LCD touch display with a resolution of 1280x800 pixels
• 

  Rigol DNA5202 2-Port Vector Network Analyzer (5 kHz - 20 GHz)

  $34,026

  2-port vector network analyzer from 5 kHz to 20 GHz with a 25.65 cm LCD touch display with a resolution of 1280x800 pixels
• 

  Rigol DNA5262 2-Port Vector Network Analyzer (5 kHz - 26 GHz)

  $42,043

  2-port vector network analyzer from 5 kHz to 26.5 GHz with a 25.65 cm LCD touch display with a resolution of 1280x800 pixels
• 

  Rigol ECAL109-NF2 - Electronic Calibration Module (100kHz to 9GHz, Type-N (f), 50 Ω, 2 ports)

  $6,773$3,206

  Electronic Calibration Module, 100 kHz ~ 9 GHz, Type-N (f), 50 ohm, 2 ports. ECal module is applicable to calibrate, correct errors for vector network analyzers from Rigol Frequency range: 100 kHz to 9GHz Maximum power level: +10 dBm Maximum protective DC voltage: ±10 VDC RF connector type: Type-N 50 O female connector Number of ports supported: 2 Power supply: USB 2.0
• 

  Rigol ECAL114-NF2 - Electronic Calibration Module (100kHz to 14GHz, Type-N (f), 50 Ω, 2 ports)

  $7,481$3,562

  Electronic Calibration Module, 100 kHz ~ 14 GHz, Type-N (f), 50 ohm, 2 ports. ECal module is applicable to calibrate, correct errors for vector network analyzers from Rigol Frequency range: 100 kHz to 14GHz Maximum power level: +10 dBm Maximum protective DC voltage: ±10 VDC RF connector type: Type-N 50 O female connector Number of ports supported: 2 Power supply: USB 2.0
• 

  Rigol ECAL126-35F2 - Electronic Calibration Module (100kHz to 26.5GHz, 3.5mm(f), 50 Ω, 2 ports)

  $10,100$4,809

  Electronic Calibration Module, 100 kHz ~ 26.5 GHz, 3.5 mm (f), 2 ports. ECal module is applicable to calibrate, correct errors for vector network analyzers from Rigol Frequency range: 100 kHz to 26.5GHz Maximum power level: +10 dBm Maximum protective DC voltage: ±10 VDC RF connector type: 3.5mm female connector Number of ports supported: 2 Power supply: USB 2.0
• 

  Rigol MCAL104-NF1 DC-4.5GHz

  $711

  Mechanical Calibration Kit, DC ~ 4.5 GHz, Type-N (f), 50 Ω for DNA5000/6000
• 

  Rigol MCAL104-NM1 DC-4.5GHz

  $711

  Mechanical Calibration Kit, DC ~ 4.5 GHz, Type-N (m), 50 Ω for DNA5000/6000
• 

  Rigol MCAL104-SF1 DC-4.5GHz

  $890

  Mechanical Calibration Kit, DC ~ 4.5 GHz, 3.5 mm (m) for DNA5000/6000
• 

  Rigol MCAL104-SM1 DC-4.5GHz

  $890

  Mechanical Calibration Kit, DC ~ 4.5 GHz, 3.5 mm (m) for DNA5000/6000
• 

  Rigol MCAL109-NF1 DC-9GHz

  $2,671

  Mechanical Calibration Kit, DC ~ 9 GHz, Type-N (f), 50 Ω for DNA5000/6000
• 

  Rigol MCAL109-NK1 ( 85032F equivalent )

  $4,987

  RIGOL MCAL109-NK1 Mechanical Calibration Kit, 9GHz, Type-N (M/F), 50 Ohm, For DNA5000/6000 Series
• 

  Rigol MCAL109-NM1 DC-9GHz

  $2,671

  Mechanical Calibration Kit, DC ~ 9 GHz, Type-N (m), 50 Ω for DNA5000/6000
• 

  Rigol MCAL109-SF1 9GHz

  $3,205

  Mechanical Calibration Kit, DC ~ 9 GHz, 3.5 mm (f) for DNA5000/6000
• 

  Rigol MCAL109-SK1

  $5,343

  RIGOL MCAL109-SK1 Mechanical Calibration Kit, 9GHz, SMA (M/F), 50 Ohm, For DNA5000/6000 Series
• 

  Rigol MCAL109-SM1 9GHz

  $3,205

  Mechanical Calibration Kit, DC ~ 9 GHz, 3.5 mm (m) for DNA5000/6000
• 

  Rigol MCAL126-35K1 3.5mm 26.5GHz

  $8,016

  2-port VNA, 5 kHz to 8.5 GHz network analyzer, Rigol RF test equipment, microwave network analyzer, benchtop VNA 8.5GHz
• 

  TEST Cable 3.5mm male to N male Armoured Jacket 18GHz

  $489
• 

  TEST Cable N male to SMA female Armoured Jacket 18GHz

  $440

  18GHz Phase stable test cable assemby