Dear Customer, The festive season is just around the corner and to ensure we can support you effectively we would like to confirm our opening hours and the level of support that is available to you over the holiday period. however, you can shop online 24/7 at Eyou.com.au. Our staff will ship product through-out the festive season – please remember that delivery times may be affected by public holidays. 11 December - 18 December - Cable assembly production CLOSED 19 December - 4 January - Shipping CLOSED
Best wishes & happy holidays, From the Racomtech ( Eyou.com.au online Shop ) team
The VSWR ( The voltage standing wave ratio ) is a measure of impedance match of load to the transmission line. Return loss is the measure of the magnitude of the reflection coefficient ( negative value ) in dB.
The outer conductor size of these connectors prevents the mating of incompatible connectors. Connectors in each of the shaded areas below have the same size outer conductor and therefore can safely be mated together.
However, damage to connectors occurs from wear, lack of cleaning, improper connection techniques, and poor handling techniques. When mated, a damaged connector can cause another connector to also become damaged. Therefore, clean and inspectall connectors before mating.
Connector_Type
Outer_diamension
Frequenc_Range
Mates_with...
Notes
1.0 mm
To 110 GHz
1.0 mm
Much smaller connector than any of those below.
1.85 mm
To 70 GHz
2.4 mm
The outer thread size of the 1.85 and 2.4 connectors is bigger than SMA, 3.5, and 2.92. This makes the area of the outer conductor mating surface look very large compared to the relatively small air dielectric.
2.4 mm
To 50 GHz
1.85 mm
The 1.85 mm connector that is manufactured at Keysight has a groove in the male nut and female shoulder to distinguish these two connector types.
2.92 mm
To 40 GHz
3.5mm and SMA
These two connectors use the same center pin.
3.5 mm
To 34 GHz
2.92 mm and SMA
SMA
To 24 GHz
2.92 mm and 3.5 mm
Uses a PTFE dielectric.
Note: SMA connectors are a common and inexpensive type, but their lack of precision affects their durability and performance, and can cause increased wear when mated with other (precision) connectors. SMA connectors are only rated for a very limited number of connection cycles and should be examined before each use.