RACOMTECH is a professional RF & Microwave technology company, our RF & Microwave products...
Read moreCatalog
- –Test Instruments
- –Coaxial Cable & Assemblies
- –RF Components
- –RF Connectors
- –Coax Adapters
- –2.92mm
- –3.5mm
- –4.3/10 to N, 716
- –BNC - UHF
- –F to BNC
- –In series BNC
- –In series DIN 716
- –In series N type
- –In series RP-SMA
- –In series SMA
- –In series TNC
- –In series UHF
- –N Type - BNC
- –N Type - DIN716
- –N type - F adapter
- –N type - MCX
- –N type - RP-SMA
- –N Type - SMA
- –N type - SMB
- –N Type - TNC
- –N Type - UHF
- –RP-SMA / RP-TNC
- –SMA - F adapter
- –SMA - RP-SMA
- –SMA / BNC Adapter
- –SMA / TNC adapters
- –SMA / UHF adapters
- –TNC / RP-SMA / BNC
- –K 2.92mm
- –3.5mm
- –N type
- –QMA
- –SMA
- –TNC
- –7/16 DIN
- –4310
- –BNC
- –FME
- – F
- –MCX
- –SMB
- –UHF
- –Coax Adapters
- –Tools & Soldering Station
- –Custom Design
- –Clearance Centre
Information
LatestCable Catalogue
Ournews
-
01/28/2020
-
04/01/2018
The VSWR ( The voltage standing wave ratio ) is a measure of impedance match of load to the transmission line. Return...
Read more -
03/31/2018
The outer conductor size of these connectors prevents the mating of incompatible connectors. Connectors in each of the...
Read more -
03/21/2018
Simplified EMI PreCompliance & Debug RSA5000 SERIES SPECTRUM ANALYZERS High Performance Real-Time...
Read more
N male to 3.5mm male Armoured Jacket TEST Cable 18GHz
Category:
Armoured Trest Cables
Description
Reviews (0)
Features
Overview
18GHz N male to 3.5mm male armoured TEST CABLE with Passivate Stainless Steel connectors
- High Phase Stable
- Ultra low insertion loss
- Supports over 5000 mating cycles
- High shielding effectiveness 90dB
- Frequency up to 18GHz
- Low VSWR: 1.15@18GHz
- Low cost test cable for microwave band
- Recommended for VNA and spectrum analyser test cable
| ELECTRICAL CHARACTERISTICS | ||
|---|---|---|
| Characteristic impedance | 50Ω | |
| operating frequency range | DC – 18GHz | |
| VSWR | 1.20 ( typical <1.12 ) | |
| voltage withstanding5 | 00 V rms | |
| Mechanical Phase Stability* | <±5º | |
| Amplitude Stability vs Shaking | 0.1dB | |
| velocity of propagation | 70% | |
* Wrapped 360˚ around a 35mm diameter mandrel.
| FREQUENCY / ATTENUATION MAX POWER (sea level / 25 °C) |
|||
|---|---|---|---|
| GHz | dB/ m | dB / ft | Watts |
| 1 | 0.38 | 0.09 | 290 |
| 3 | 0.71 | 0.20 | 156 |
| 6 | 0.97 | 0.29 | 103 |
| 8 | 1.09 | 0.36 | 86 |
| 12 | 1.47 | 0.48 | 67 |
| 18 | 1.74 | 0.54 | 51 |
| attenuation calculation (dB/m) | (0.342022 x √f GHz) + (0.039443 x f GHz) | ||
| power calculation (W) | 290 / √f GHz | ||
Typical Test Data Plot @ 1M length
Features
| Cable Type | RTF2, WTF2-60 |
| Connector 1 Series | N |
| Connector 2 Series | 3.5mm |
| IMPEDANCE | 50 Ohm |
| Length (M) | 0.5 m, 1 m, 1.5 m, 2 m |
| FREQUENCY | 18 GHz |
