RACOMTECH is a professional RF & Microwave technology company, our RF & Microwave...
Read moreCatalog
- –Test Instruments
- –Coaxial Cable & Assemblies
- –RF Components
- –RF Connectors
- –Coax Adapters
- –2.92mm
- –3.5mm
- –4.3/10 to N, 716
- –BNC - UHF
- –F to BNC
- –In series BNC
- –In series DIN 716
- –In series N type
- –In series RP-SMA
- –In series SMA
- –In series TNC
- –In series UHF
- –N Type - BNC
- –N Type - DIN716
- –N type - F adapter
- –N type - MCX
- –N type - RP-SMA /
- –N Type - SMA
- –N type - SMB
- –N Type - TNC
- –N Type - UHF
- –RP-SMA / RP-TNC
- –SMA - F adapter
- –SMA - RP-SMA
- –SMA / BNC Adapter
- –SMA / TNC adapters
- –SMA / UHF adapters
- –TNC / RP-SMA / BNC
- –K 2.92mm
- –3.5mm
- –N type
- –SMA
- –TNC
- –7/16 DIN
- –4310
- –BNC
- –FME
- – F
- –MCX
- –SMB
- –UHF
- –Coax Adapters
- –Tools & Soldering Station
- –Custom Design
- –Clearance Centre
Information
LatestCable Catalogue
Ournews
-
01/28/2020
-
04/01/2018
The VSWR ( The voltage standing wave ratio ) is a measure of impedance match of load to the transmission line....
Read more -
03/31/2018
The outer conductor size of these connectors prevents the mating of incompatible connectors....
Read more -
03/21/2018
Simplified EMI PreCompliance & Debug RSA5000 SERIES SPECTRUM ANALYZERS High Performance Real-Time...
Read more
DSO1062B Handheld Oscilloscope / Multimeter 60MHz 1GSa/s
Category:
Description
Reviews (0)
Features
Overview
1. Download:
 |
|
 |
|
| Software | 64 Driver | Manual | Firmware |
2. Characteristic(Handheld Oscilloscope/Multimete)
• High Bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
• 1M Memory Depth.
• High Refresh Rate (2500 frames)
• Large 5.6 inch TFT Color LCD Display，High Resolution(640*480), Dual-Window Design --More clear, More Detailed
• One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
• Easy-to-use pop-up menu with built-in multi-language help system
• 23 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall over
• Automatic cursor tracking measurements
• XY Mode
• Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
• Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
• Pass-Fail function compares a stored waveform to an unknown input
• Average Mode for smoothing waveforms
• Square Wave Output (2V, 1kHz) for probe adjustment
• USB Host/Device 2.0 full-speed interface ,support removeable disk, LAN Optional ,Easy to control by PC or long-distance.
• Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
• Labview\VB\VC Second Design instance.
3. Oscilloscope pictures:
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Hardware Specification
|
Model |
DSO1202B |
DSO1102B |
DSO1062B |
|
Oscilloscope mode |
|||
|
Bandwidth |
200MHz |
100MHz |
60MHz |
|
Real-time Sample Rate |
1GSa/s |
||
|
Equivalent Sample Rate |
25GSa/s |
||
|
Record Length(Sample Points) |
Single-channel: Maximum 1M; Dual-channel:Maximum 512k |
||
|
SEC/DIV Range |
2nS/div-2000S/div (in a 2, 4, 8 sequence) |
||
|
Delay Time Accuracy |
500ps |
||
|
Vertical |
|||
|
A/D Converter |
8-bit resolution |
||
|
VOLTS/DIV Range |
2mV/div～5V/div at input BNC |
||
|
Position Range |
±50V(5V/div),±40V(2V/div～500mV/div),2V(200mV/div～50mV/div)±400mV(20mV/div～2mV/div) |
||
|
Rise Time at BNC |
≤1.7ns |
≤3.5ns |
≤5.8ns |
|
DC Gain Accuracy |
±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div |
||
|
Trigger |
|||
|
Trigger Sensitivity |
DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full |
||
|
Trigger Level Range |
CH1,CH2: ±8 divisions from center of screen |
||
|
Trigger Level Accuracy, |
CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) |
||
|
Holdoff Range |
100ns-10s |
||
|
Trigger Type |
|||
|
Edge |
Trigger on the rising or falling edge |
||
|
Pulse Width |
Trigger (when >,<,=,≠) on positive or negative pulses |
||
|
Video |
Trigger on an NTSC, PAL, or SECAM standard video signal |
||
|
Slope |
Trigger (when >,<,=,≠) on a positive or negative slope |
||
|
Overtime |
from the rising or falling edge |
||
|
Alternate |
Internal trigger on edge, pulse width, video or slope |
||
|
Measurement |
|||
|
Cursors |
Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz. |
||
|
Automatic |
Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width |
||
|
Meter Mode |
|||
|
Max.Resolution |
6,000 Counts |
||
|
DMM Testing Modes |
Voltage, Current, Resistance, Capacitance,Diode & Continuity |
||
|
Max. Input Voltage |
AC: 600V, DC: 800V |
||
|
Max. Input Current |
AC: 10A, DC: 10A |
||
|
Input Impedance |
10 MΩ |
||
|
Display |
|||
|
Type |
Right angle 5.6 16-digit color LCD |
||
|
Resolution |
640*480 dots |
||
|
Contrast |
16 gears, with the progress bar to show adjustment |
||
|
Interface |
USB host and USB slave, Lan Optional |
||
|
Power Supply |
|||
|
Voltage |
DC Input:12--17VDC, 1500mA |
||
|
Mechanical |
|||
|
Size |
245 x 163 x 52 (mm) |
||
|
Weight |
1.3KG (exclusive of packing and accessories) |
||
6．Software：
Operating system: Windows NT, Windows 2000, Windows XP ,VISTA
Features
| FREQUENCY | 60 MHz |
| TYPE | Handheld |
| FUNCTION | Digital storage, Multimeter |
| CHANNELS | 2CH |
| BRAND | Hantek |
| WEIGHT (Packed) | 2.5 kg |
