Currency: 
Shopping cart: (empty)

Total amount (with discount)empty

Go to cart
  • +61-3-88029296
  • E-mail: sales@eyou.com.au
  • mount waverley, vic 3149
  • +61-3-88029296

DSO1102B Handheld Oscilloscope / Multimeter 100MHz 1GSa/s

Print

SKU: 50-0324
Click CheckBox before select items:
Share:
  • Description

  • Reviews (0)

  • Features

Overview

1. Download:

download
download
pdf
download
Software 64 Driver Manual Firmware

 

2. Characteristic(Handheld Oscilloscope/Multimete)
• High Bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
• 1M Memory Depth.
• High Refresh Rate (2500 frames)
• Large 5.6 inch TFT Color LCD Display,High Resolution(640*480), Dual-Window Design --More clear, More Detailed
• One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
• Easy-to-use pop-up menu with built-in multi-language help system
• 23 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall over
• Automatic cursor tracking measurements
• XY Mode
• Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
• Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
• Pass-Fail function compares a stored waveform to an unknown input
• Average Mode for smoothing waveforms
• Square Wave Output (2V, 1kHz) for probe adjustment
• USB Host/Device 2.0 full-speed interface ,support removeable disk, LAN Optional ,Easy to control by PC or long-distance.
• Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
• Labview\VB\VC Second Design instance.

3. Oscilloscope pictures:

20118653274.jpg 20118613559.jpg
20118678765.jpg 20118661113.jpg
20118668361.jpg 20118687126.jpg
20118670949.jpg 20118662083.jpg
20118625218.jpg 20118686577.jpg
20118619895.jpg 20118627180.jpg
Upfiles/20118652890.jpg 20118653294.jpg

Hardware Specification

  Model  

DSO1202B

DSO1102B

DSO1062B

Oscilloscope mode

Bandwidth

200MHz

100MHz

60MHz

Real-time Sample Rate

1GSa/s

Equivalent Sample Rate

25GSa/s

Record Length(Sample Points)

Single-channel: Maximum 1M; Dual-channel:Maximum 512k

SEC/DIV Range

2nS/div-2000S/div (in a 2, 4, 8 sequence)

Delay Time Accuracy

500ps

Vertical

A/D Converter

8-bit resolution

VOLTS/DIV Range

2mV/div~5V/div at input BNC

Position Range

±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div)

Rise Time at BNC

≤1.7ns

≤3.5ns

≤5.8ns

DC Gain Accuracy

±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger

Trigger Sensitivity
(Edge Trigger Type)


DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
EXT(Typical) 200mV from DC to 40MHz
EXT/5(Typical) 1V from DC to 40MHz
AC: Attenuates signals below 10Hz

HF Reject: Attenuates signals above 80kHz

LF Reject: Attenuates signals below 150kHz

Noise Reject: Reduces trigger sensitivity

Trigger Level Range

CH1,CH2: ±8 divisions from center of screen
EXT: ±1.2V EXT/5: ±6V

Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns)                      

CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)


Holdoff Range

100ns-10s

Trigger Type

Edge

Trigger on the rising or falling edge

Pulse Width

Trigger (when >,<,=,≠) on="" positive="" or="" negative="" pulses="" br=""> Pulse Width Range: 20ns-10s

Video

Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)

Slope

Trigger (when >,<,=,≠) on="" a="" positive="" or="" negative="" slope="" br=""> Set Time: 20ns–10s

Overtime

from the rising or falling edge
Set Time: 20-10s

Alternate

Internal trigger on edge, pulse width, video or slope

Measurement

Cursors

Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz.
Tracing: The voltage and time at a waveform point

Automatic

Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width

Meter Mode

Max.Resolution

6,000 Counts

DMM Testing Modes

Voltage, Current, Resistance, Capacitance,Diode & Continuity

Max. Input Voltage

AC: 600V, DC: 800V

Max. Input  Current

AC: 10A, DC: 10A

Input Impedance

10 MΩ

Display

Type

Right angle 5.6 16-digit color LCD

Resolution

640*480 dots

Contrast

16 gears, with the progress bar to show adjustment

Interface

USB host and USB slave, Lan Optional

Power Supply

Voltage

 DC Input:12--17VDC, 1500mA

Mechanical

Size

245 x 163 x 52 (mm)

Weight

1.3KG (exclusive of packing and accessories)

6Software

Operating system: Windows NT, Windows 2000, Windows XP ,VISTA

 

Features

FREQUENCY 100 MHz
TYPE Handheld
FUNCTION Digital storage
CHANNELS 2CH
BRAND Hantek
WEIGHT 2.9 kg

Reviews

© Racomtech Pty Ltd (ACN:134853 473) / EYou Trust Australia ( ABN 51 687 385 403)

  • +61-3-88029296
  • E-mail: sales@eyou.com.au
  • mount waverley, vic 3149
  • +61-3-88029296

Dear friends!

Unfortunately, your browser does not support modern technology used on our website.

Please refresh your browser by downloading it on the links below or contact your system administrator serving your computer.

Internet Explorer

от Microsoft

Chrome

от Google

Safari

от Apple

Opera

от Opera Software

Firefox

от Mozilla